Type 12 Mild Steel Multi-Door Freestanding Enclosure. Continuous Hinge Door with Handle.

Application

• Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
• Provides a degree of protection from falling dirt, dust, oil and water.

Standards

• UL 508 Type 12
• CSA Type 12
• Complies with
  • NEMA Type 12
  • JIC EGP-1-1967
  • IEC 60529, IP54

Construction

• Formed 10 gauge steel.
• Smooth, continuously welded seams without knockouts, cutouts or holes.
• Heavy duty body stiffeners are provided for extra rigidity.
• Reinforced eyebolts are provided for easy enclosure lifting.
• Double door openings have gasketed overlapping doors, eliminating the need for a center post.
• Continuously hinged doors may be removed by pulling the hinge pin.
• Doors are secured with a three point padlocking handle.
• Latch rods are equipped with rollers for easier door closing.
• Oil resistant gaskets are permanently secured.
• Removable 10 gauge inner panels are included in the enclosures.
• 3 door units have 2 panels (34" x 78" and 70" x 78").
• 4 door units have 2 panels (70" x 78" each).
• 5 door units have 3 panels (one 34" x 78" and two 70" x 78").
• Slave doors have mechanical interlock and cannot be opened unless the master door is open.
• Panel supports are provided in enclosures for easy panel installation.
• Collar studs are provided for mounting inner panels.
• A grounding stud is provided in the enclosure for each door and a bonding stud is pro­vided on the door.
• A literature pocket is provided for the inside of the door.

Finish

• Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating on the outside, with white powder coating on the inside.
• Removable inner panels are finished in white powder coating.

Spec Sheet