Type 4 Mild Steel Two Door Floormount Enclosure. Continuous Hinge Door with Quarter Turn.

Application

• Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
• Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.

Standards

• UL 508 Type 3R, 4 and 12
• CSA Type 3R, 4 and 12
• Complies with
  • NEMA Type 3R, 4 12 and 13
  • JIC EGP-1-1967
  • IEC 60529, IP66

Construction

• Enclosures are formed 12 or 10 gauge steel as noted.
• Smooth, continuously welded seams without knockouts, cutouts or holes.
• Body stiffeners are provided in the larger enclosures for extra rigidity.
• Heavy duty lifting eyebolts are provided with reinforcing support angles.
• Center post is removable for easy installation of the inner panel.
• Formed lip on door and top of enclosure opening exclude flowing liquids and contaminants.
• Continuously hinged doors may be removed by pulling the stainless steel hinge pin.
• Doors are secured with quarter turn latches.
• Provision for padlocking.
• 12" floor stands are welded to the enclosure.
• Seamless poured-in place gasket.
• Provision for light kit mounting.
• A removable 10 gauge inner panel is included.
• Panel supports are provided for easy panel installation.
• Collar studs are provided for mounting inner panels.
• A bonding stud is provided on the door and a grounding stud is provided in the enclosure for each door.
• A literature pocket is provided for the inside of the door.

Finish

• Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
• Removable white inner panel is finished in white powder coating.

Spec Sheet