News

Energy Storage Systems allow for an increased on-site consumption of energy. Energy can be stored and then retrieved when demand is high. This also acts as back up power in the event of an interruption to the supply of electricity from the grid. Furthermore reducing usage from the electricity grid during peak hours, which leads to reduced utility costs. Energy Storage System Requirements Power Supplies for Energy Storage Systems The demand for ESS is constantly changing and growing with a higher requirement for power supplies with features such as improved EMC performance, wider operating temperatures and a high isolation voltages, these...

Along with the upgrading of traditional manufacturing processes and increased requirement for industrial automation, traditional industries like industrial control & communication industries have an increased demand for medium-power DC/DC power supplies. Following this trend, MORNSUN's new 100W DC/DC converter—URF48xxQB-100WR3 series that have an  18-75V ultra-wide input voltage and can be widely used in industrial control, communication, electrical generation and railway applications. For example ~ intermediate bus in Industrial control systems, distributed power systems, wireless network equipment systems, medium - high power control systems & long-distance DC power supply systems. With efficiencies up to 94% the URF48xxQB-100WR3 series seeks to offer...

Performance - Small Size - Price - High Reliability - Quick Delivery Mornsun DC/DC Converters & EMC filters are used in on-board and track side systems & for communication between track side and on-board equipment. Features Input: 40-160 VDC Isolation: 2250/3000 VDC Operating Temp. : -40 to 100ºC Protection: UVP/OCP/OVP/SCP EN50155/EN60950 Example Applications 01 - Air Conditioning Control On-board System URB1D05LMD-15WR3 - Powers the Monitoring Circuit A0515S-2WR2 - Powers Signal Processing Circuit TD501MCAN (Integrate Power Isolation) - Suppressing Common-mode Interference 02 - LED Lighting System On-board System LED lighting to illuminate railway carriage ceilings, walls, steps, toilets and vestibules. Datasheet Link Request...

Mornsun's LO10-26D0512-04L supplied by DLPC Pty Ltd is a Three-Phase Three or Four Wire open frame switched-mode power supply designed for use in the electricity industry for Electric Power Smart Meter applications. The AC/DC converter with ultra-wide input voltage 57-528VAC (80-745VDC) for nominal voltages in three-phase four-wire systems & any two wire connection in a 3-Phase four-wire system. Offering  4KVAC isolation that complies to IEC/EN61000 standard EFT (±4KV), surge (±2KV) and CE/RE meets CISPR22/EN55022 CLASS B. This unit is suitable for applications that have a higher requirement of isolation & EMC performance with protections SCP, OCP, OVP makes this unit...

NEW ULTRA COMPACT CAN Transceivers  are 60% Smaller.  So small only about the footprint of an 8 PIN DIP IC !Distributed by DLPC Pty Ltd in ANZ these new CAN transceivers available in 3.3VDC or 5VDC offer devices with ISO Standards, Baud to 1Mbps & 5Mbps for FD , BUS up to 110 Nodes & Dual Port Isolation @ 2500V , +/- 4000v Static Protection, with an operating temperature range of up to 105c & time out protection. TD_MCAN conforms to ISO 11898-2 standard & TD_MCANFD conforms to ISO 11898-5 physical layer standard. Check it out Data link TD301MCAN &...