Menu

NOTICE Mornsun is currently unavailable worldwide due to unforseen circumstances until further notification.
Please refer to Aipu Power on our web site for alternative products and or contact us directly.

News

NEW Mornsun 6W SIP8 Space-saving Wide Input Voltage R3

NEW Mornsun 6W SIP8 Space-saving Wide Input Voltage R3

URB_S-6WR3, VRB_S-6WR3 6W Compact Size DC/DC Converter 4:1/ 2:1 Input voltage:9-36VDC, 9-18/18-36 VDC  Operating temperature:-40℃ to +105℃  High efficiency up to 87%  Isolation voltage: 1600VDC  Protection: input under-voltage, output short-current, over-current protection  Single output of 3.3, 5, 9, 12, 15, 24 V UL62368\EN62368 (pending) URB_S-6WR3 VRB_S-6WR3

Read more →


Mornsun’s 3W AC/DC converter integrated CAN/485 transceiver TLAxx-03KCAN & TLAxx-03K485 for Industrial Control

Mornsun’s 3W AC/DC converter integrated CAN/485 transceiver TLAxx-03KCAN & TLAxx-03K485 for Industrial Control

Distributed in Australia and New Zealand by DLPC Pty Ltd the NEW Mornsun TLAxx-03KCAN & TLAxx-03K485 series are 3W AC/DC power supplies with integrated CAN or RS485 transceivers that takes it’s power directly from the main AC or DC supply line (85-305VAC/100-430VDC) and can be used with either AC or DC in a dual use application . They are compact in size, cost-effective & ideal for industrial control, grid power and instrumentation applications. There are two isolated outputs, the main DC power output is up to 2.5W and the auxiliary powers bus communication. The AC/DC mains isolation voltage is 4000VAC...

Read more →


5 Reasons the new Mornsun R3 DC/DC Converters are a perfect fit for your product

5 Reasons the new Mornsun R3 DC/DC Converters are a perfect fit for your product

Lower No-Load Current Consumption (Typically lower than 5ma)No-Load current consumption performance is 2-4 times better than common and international main stream brands. This is particularly advantageous in battery powered devices or other applications where low power consumption in required. 20% Better Light Load Efficiencies (against previous R2 series and other brands)High & low load temperatures are considerably lower for R3 Series. High load temp from 60.7ºc to 42.7ºc and low load temps from 39.6ºc to 31.2ºc when measured against the R2 series. Full Range Short Circuit ProtectionWith continuous recovery and less than 5ma short circuit current. Greater Capacitive Load HandlingWith C-C...

Read more →


Mornsun NEW SMD Non-isolated .5A & 1A Switching Regulators K78xxT-500R3&1000R3 Series

Mornsun NEW SMD Non-isolated .5A & 1A Switching Regulators  K78xxT-500R3&1000R3 Series

MORNSUN distributed in Australia & New Zealand by DLPC Pty Ltd has just released a new series of non-isolated 500ma & 1A SMD regulators, with miniature size of 15.24x11.40x8.25mm & high efficiencies of up to 95%, no-load input current as low as 0.2mA, output short circuit protection Meets UL62368, EN62368 ,IEC62368 (pending), wide operating temperature range -40~+85c no heatsink required, wide range of output voltages available 1.5, 1.8, 2.5, 3.3, 5, 6.5, 9, 12V for all models & 15V in 1A & are compatible with traditional LM78xx linear regulators. Mornsun’s new SMD packaged K78xxT-500R3/K78xxT-1000R3 series meet reflow soldering production requirements,...

Read more →


Mornsun’s New RS485 & CAN Transceivers TDx21D485x, TDx21DCANx & TDx22DCAN Series with Open Frame and DIP10 packages

Mornsun’s New RS485 & CAN Transceivers TDx21D485x, TDx21DCANx & TDx22DCAN Series with Open Frame and DIP10 packages

MORNSUN announced cost-effective, compact size CAN and RS485 transceivers TDx21D485x, TDx21DCANx and TDx22DCAN series, which assists fast signal response in power grid industries, industrial control & instrumentation and are designed offering excellent performance, improved manufacturing process and reliability that are Patent Protected. All the devices offer EMC performance, 3KVDC isolation, Baud rate of low-speed RS485 transceivers from 9.6kbps up to 19.2kbps, Nodes of low-speed and high-speed transceivers are doubled, i.e. 64 nodes. Nodes of auto-switch interface increase by 4 times, i.e. 128 nodes. All devices in this series are output isolated 5V at the terminal of bus, easy for default...

Read more →