News

MORNSUN has recently announced a two-channel 485 isolation transceiver module TDx22D485H-A series, to assist fast signal response in industries such as but not limited to ~ power grid, industrial control, transportation and instrumentation. All MORNSUN products are distributed in Australia & New Zealand by DLPC Pty Ltd. Product advantages are as follows, Data rate up to 120kbps Two-channel isolation, supports full-duplex communication mode Automatic Switching, which can help the user save the cost of software compared to the conventional 485 products Internal construction is highly integrated, the size of duplex series TD5x22D485H-A is same as the single out series TDx21D485H-A...

Mornsun has added four new series of DC converters all with dual isolated regulated outputs to the R3 DC/DC wide input converter family the URD-S-3WR3, URD-YMD-10WR3, URD-LD-20WR3 and URD480524D-30WR3 series adopt international standard pins, have strong EMI ability and good compatibility. As well as this the series provides a 4:1 ultra-wide input voltage range, with efficiencies up to 84%. Additional to meeting EN62368 standards, offers protection for input under-voltage, output short circuit & over-current. Typical applications include but not limited to are ~ data transmission, Tele-communications, distributed power supply systems, hybrid A/D systems, remote control systems. Mornsun products are distributed...

MORNSUN recently launched a new isolated CAN transceiver TD5(3)01DCANHE series with top EMC performance, which has two optional voltages of 3.3V and 5V, that is are designed to withstand high voltage transients of up to 15 kV IEC ESD (air discharge), 8 kV IEC ESD (contact discharge), and a 4 kV surge. Along with outstanding EMC performance, the new series not only has low electromagnetic radiation and high resistance to electromagnetic interference, but is also stable in high interference environments. Adopting new IC integrated technologies the TD5(3)01DCANHE series significantly improves EMC performance and a maintains a small DIP8 package. Now...

The Hammond Electronics 1554 and 1555 series of enclosures are optimized for use in harsh industrial environments, the 1554 flat lid and 1555 styled lid ranges of ABS and UV stabilized polycarbonate enclosures that are IP66 rated by use of a one piece silicone gasket in a tongue and groove seal with good mechanical protection.  The light grey RAL 7035 enclosures are designed to house PCB's or DIN rail.  23 sizes from 66 x 66 x 41 mm to 239 x 160 x 119 mm are available with flat and styled self coloured, clear and translucent lids.  Also offering enclosures with Flanged lids in 10 sizes from 119...

MORNSUN’s new switching regulator K78xx-2000R3 series is rated at 2A in addition to their non-isolated DC-DC converter range and designed as drop-in alternatives for traditional 78xx series three-terminal linear regulators. Features an ultra-wide input voltage range of 6-36V, an 0.1mA ultra-low no load input current, continuous short-circuit protection, with low ripple noise ~ typically 30mV with a wide operating temperature of -40 to +85c, whilst delivering efficiencies up to 95%, eliminating any heat sink requirement. Due to its low cost and small size only 11.5x9.00x17.5mm makes the K78xx-2000R3 series a small and efficient regulator suitable for use in industrial control,...